× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 27, 2016
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Asian
Help Request Answers
2004 Hyundai Elantra GLS 2.0L No Start VIN: KMHDN46D94
So I got this car to fix and sell. it was overheating so bad it damaged the engine. replaced the engine with a used one from a 2006. It was running before the engine, just had low compression. When we hooked up the battery the car started by itself and wouldn'... Trouble codes: P0335
View
2007 Hyundai Santa Fe SE 3.3L Poor Idle Quality, Hesitation, Misfire, MIL Lamp on VIN: 5NMSH13E27
hi all ,got this santa fe 3.3l and customer said on a grocery store run it started fine,drove good for a minute,then bucked and chugged for a few moments,check engine light started flashing.they turned around and made it home.then it started and ran fine in to... Trouble codes: P0300, P2A03
View
2005 Nissan Altima SE 3.5L No Start
Gonna keep this short and simple. Shop replaced motor in this 05 Altima 3.5 litre. Car owner got motor from someplace online called Japanese motors. Don't have injector pulse. If you spray with carb cleaner will start up. No cases of no injector pulse on IATN ...
View
2000 Subaru Impreza RS 2.5L rear brake rotors VIN: JF1GC6752Y
We're replacing the rear brake rotors. Got OEM subie (part # [...]) rotors. they go on smoothly, but when tightening them down with the lug nuts (without the calipers put back on) the rear wheels lock up. Put the old rotors on, tighten down, wheels turn o...
View
2011 Subaru Legacy 2.5i 2.5L Compressor VIN: 4S3BMBC63B
The car came in with a piece of metal lodged in the condenser. Of coarse there was no refrigerant in the system. We replaced the condenser and charged the system and everything worked well. Now it's back still has a full charge but hte a/c works intermittently...
View

Fixes & Summaries for Asian
Fix/Summary Answers
1998 Honda CR-V LX 2.0L Extended crank VIN: JHLRD184XW
I was also thinking head gasket, but was hoping for a different cure. Fuel pressure would drop about 10 psi per hour when sitting. I had already cleaned the throttle body. Spark and injector pulse was good. Since the cooling system was straight water when we b...
25
2002 Honda Accord SE 2.3L windows VIN: 1HGCG56702
Sorry for the slow response, just wanted to make sure this one was fixed. we ended finding the 2 rear window switches were bad. replaced them and all is well again. customer called and said all is well and doing great. thanks again for all the replies.
12
2002 Isuzu Trooper Limited 3.5L Transfer case VIN: JACDJ58X02
The Trooper is fixed. After the replacement module didn't make any difference, I went back over my tests and went at it a different way. Clifford had suggested disconnecting sensors to see if the 5V reference came back. I thought for sure that that was covered...
2
2004 Mitsubishi Lancer ES 2.0L Starting VIN: JA3AJ26E84
finger out the sencond time the oil was milky but the first time it came in it was not
12
2005 Mitsubishi Eclipse GS 2.4L AC Compressor VIN: 4A3AC44G85
flushed system and replaced recompressor, condensor, drier, and expansion valve. AC system now running adequately.
10
2001 Suzuki Vitara JX 2.0L Poor Idle Quality, Hesitation, Surge, Lack of power VIN: 2S3TD52V01
Found the computer randomly opening the number 3 injector all the way intermitantly for a split second. Figured this out by using a gas analizer and watching the data. The data did not match what was coming out of the tail pipe. I then watched all four injecto...
7
1999 Toyota Camry CE 2.2L Excessive Emissions, MIL Lamp on VIN: 4T1BG22K1X
Thanks to all who responded. Everybody came back with the Vacuum Switching Valve being the issue. I replaced the VSV and had him drive it and it passed readyness, vehicle is inspected. Again thanks for the help. Trouble codes: P0401 (Insufficient EGR flow).
14
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next