 Prev |
Professional Automotive Repair Technical Discussions for April 22, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2004 Ford F-350 Super Duty XL 6.0L icp VIN: 1FDWF37P14 Hello and thanks in advance. This truck came in on a wrecker for a no start. Customer says it was running great and then shut down. Stored codes for p0284 cyl 8 contribution, p0404 egr position,p0677 cyl 7 glow plug, P1379 Ficm supply voltage high. I cleared a... |
View | |
| 2006 Ford Mustang GT 4.6L Monitors VIN: 1ZVFT82H86 No codes present or pending. Only able to get the evap monitor to complete. Checked Mode 6 data only thing valid is evap as nothing else has run or even attempted to run. Tried reprogramming with asbuilt data. IAT, MAF, Coolant temp, fuel trims all look good. ... Trouble codes: P1000 (Monitors not complete) |
View | |
| 2007 Ford F-150 XLT 4.6L Misfire VIN: 1FTRX14W57 greetings to all got this truck from another shop at idle you can feel aslight miss.looking at cylinder contribution data i see all cylinders showing misfire with cylinder 5 and 3 being the worst going -8 on readings.those cylinders got new coils and plugs fro... Trouble codes: P0300 |
View | |
| 2008 Ford F-250 Super Duty XLT 5.4L No Start VIN: 1FTNF21598 Hey how's it going guys thanks for the help in advance. This truck was towed into the shop crank no start. Checked for codes no codes, checked fpdm looks fine at this time. Checked fuel psi 75 at key on. 57 cranking read at fuel rail psi sensor pid. Cam and Cr... |
View | |
| 2008 Ford Fusion SE 2.3L higher gears and starter VIN: 3FAHP07Z08 Customer brought vehicle in for no high gear. Hooked up computer and had codes for all gear ratios incorrect P0715 turbine speed sensor circuit, P0744 TCC Circuit intermittent. Vehicle would not start in park but started in neutral. Went to back car out of sho... |
View | |
| 2008 Ford F-350 Super Duty XL 6.4L Hesitation, Surge, MIL Lamp on VIN: 1FTWX31R18 So I just finished installing a used engine in this truck. The old engine had an injector stick open and burnt a piston. The used engine came with the fuel system complete. After finishing and bleeding, it starts up just fine. As soon as I step on the gas the ... Trouble codes: P0087, P2291 |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1989 Ford F-250 Custom 7.3L long cranking VIN: 1FTHX26M0K Sorry guys for the delay, the guy needed the truck for couple of weeks, so, anyway, the problem was in front on my eyes, let me explain why. It was loosing pressure on the fuel line the pipe that goes from the filter housing to the back of the injection pump, ... |
12 | |
| 2008 Ford F-150 Lariat 5.4L Hesitation, Surge, Stall, Misfire VIN: 1FTPX14V48 THANKS GUYS FOR ALL THE REPLIES, GUESS WHAT SOME ONE MESS UP WITH THE OIL PRESSURE SENSOR TO SEND NORMAL OR HIGH PRESSURE BUT IN REALITY IT HAS LOW PRESSURE SO OIL PUMP IS NO GOOD, CUSTOMER DECLIED REPAIR. |
38 | |
| 2008 Ford F-250 Super Duty XLT 5.4L Mechanical VIN: 1FTNF21538 Thanks o all who replied. Ended up being a cam phaser issue not going back to rest causing slack in chain. One thing I dont understand is why it ran so good. But new set of phasers fixed it. Thanks again. |
9 |
