 Prev |
Professional Automotive Repair Technical Discussions for April 18, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2005 Ford Escape XLT 3.0L torque converter VIN: 1FMYU03125 came in for "stall at stops" had codes. replaced solenoid pack and still has symptoms. When it stalls, stalls like engine is being dragged down. Neutral start, put in drive and kills engine. wait 5 seconds and no problem. Anyone with experience in this? |
View | |
| 2005 Ford F-350 Super Duty King Ranch 6.0L smokes at idle VIN: 1FTWW33P55 Noise sounds like possible turbo. Turbo does turn and shows boost, but the turbo shaft has movement. It appears that the shaft moves enough that the vanes might drag, but don't see any sign of that. I have limited experience with this turbo, is this much play ... |
View | |
| 1966 Lincoln Continental 7.6L Front Crank Seal We have never worked on 1 of these antiques. The P/S pump is directly driven by the crank.It leaks oil from between the block & the P/S pump when the engine is running! Is the front crank seal in the timing cover? Does the timing cover have to be removed & the... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2007 Ford Expedition Limited 5.4L Readiness monitors VIN: 1FMFU19587 yes engine temp was correct. Tried every trick in the book. Over 400 miles of drive cycles and many tanks of gas. Vehicle has timing chain noise and tsb to replace timing actuators. vehicle runs poorly and stalls after every programing or KAM reset. takes many... |
14 | |
| 2013 Ford F-150 FX4 3.5L Timing chain VIN: 1FTFW1ETXD Thanks to all who replied. I ended up replacing basically everything. Primary chain and tensioner, secondary chains, tensioners and all guides. Plus all 4 cam phasers. I cant really comment on what might have happened if I did not replace all of these parts bu... |
5 |
