 Prev |
Professional Automotive Repair Technical Discussions for March 7, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2008 Ford F-250 Super Duty XLT 6.4L Front Seal VIN: 1FTSW21R98 Truck come in for trans fluid leaking out of bellhousing, road tested truck, checked for codes, pulled pan to check for debris, all looked good.pulled trans and inspected converter and front pump bushing looked good, replaced seal reinstalled, roadtested leaks... |
View | |
| 2008 Ford F-350 Super Duty XLT 5.4L pcm VIN: 1FPWW35578 This vehicle has a 3 amp draw. The pcm power relay is sticking on. We put in 3 different relays, I replaced the pcm. when I unplug the relay it clicks to shut off and draw goes away if I plug it back in it does not re-energize. If I disconnect the battery the ... |
View | |
| 2012 Ford F-150 FX4 5.0L Transmission VIN: 1FTFW1EF2C We replaced the output shaft speed sensor which on this vehicle. This Sensor is part of the Lead Frame. Which you have to drop the trans pan and valve body to install. My tech who has not done one of these before dropped the valve body and out came a valve wit... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2002 Ford F-250 Super Duty XLT 7.3L Hesitation, Stall Got this one fixed about two weeks ago and just talked to the customer and all is well. The fix ended up being a bad ICP sensor and pigtail. I didn't think this would be the fix due to the fact that the ICP was doing exactly as it should in scan data. Thanks f... Trouble codes: P1211, P1210. |
8 | |
| 2009 Ford E-350 Super Duty 5.4L blower fan switch, wires and resistor VIN: 1FDSE35L89 Good afternoon. Well, we replaced the blower fan motor, switch and switch harness pigtail ( soldered all splice connections ) Measured fan current draw in all speeds and modes - Everything working fine - so far thanks to all for your time we do BETTER toge... |
11 |
