× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for January 28, 2016
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2001 Chrysler Sebring LX 2.4L Fuel odor VIN: 1C3EL46X01
Customer came in about a month ago says he could smell a gas odor. Under body inspection found no gas leak. I smoke the evap system and it passed. I never could smell the odor. He call and said he smelled gas odor again. He told me when he warms the car up to ...
View
2008 Chrysler Town & Country LX 3.3L MIL Lamp on, Extended Crank Time VIN: 2A8HR44H78
We replaced transmission and now have an extended crank and P0339 code. The tech replaced the CKP sensor with no improvement. The CKP circuit was tested for 5v, ground and signal. The signal had a good even square wave form at sensor and at PCM. Checked CMP se... Trouble codes: P0339 (Crankshaft Position Sensor Intermittent)
View
2003 Dodge Ram 3500 5.9L No Start VIN: 3D7MU48623
this dodge is a tow in,crank no start.basic checks found air filter COMPLETELY pluged,never seen a filter so pluged in my 25yrs in the buis.customer tells us he has never done any maintence in the 40.000 miles he has owned it.the air heaters are inopp,fuel psi...
View
2008 Dodge Ram 3500 Laramie 6.7L MIL Lamp on VIN: 3D7MX38AX8
I was looking for information on what the Boost/Map sensor should read at Key on. I am not finding much useful information. I cannot get any codes to set right now. My map sensor was right full of soot. Completely plugged. It was reading 13.5 PSI with key on a... Trouble codes: P0106 (Manifold absolute pressure sensor performance)
View
2001 Jeep Cherokee Sport 4.0L Driveline VIN: 1J4FF48S01
Vehicle makes noise (clunking/grinding) when turning right and accelerating between 15 and 30 miles per hour. Does not do it when turning left. Does not matter if it's in two or four wheel drive. Tried removing front driveshaft, still makes noise. Remove rear ...
View
2006 Jeep Grand Cherokee Limited 4.7L Transfer case range position sensor VIN: 1J8HD58M36
Hello I must apologise as this is the first time on Iatn We have a big problem sourcing information on the Jeep product here. Can anybody maybe give me some links to information to further test the Transfer case range switch on the Jeep Grand Cherokee we have ...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2002 Dodge Dakota Sport 4.7L Hesitation, Cuts out, Misfire, Exhaust Backfire VIN: 1B7HG38NX2
The owner decided to sell the vehicle to a mechanic I work with. The consensus of the 17 replies was that the engine was old and had valve problems. After exhausting other possibilities, I told the customer that I also believe that his engine needs to have t... Trouble codes: P0112 (IAT Sensor has not been installed since before problem), P0300 (Ramdon Misfire), P0301 (p0303-), P0303 (p0305-), P0305 (testing and results).
20
2008 Jeep Wrangler Unlimited Sahara 3.8L broken part VIN: 1J8GA59158
We fixed this with new injectors. I knew we were going to replace them, I just wanted to know what the primary reason this piece is on the injector. As to where the missing piece was, the technician who was doing the job removed the fuel rail from the intake m...
8
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next