 Prev |
Professional Automotive Repair Technical Discussions for January 12, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for GM
| Help Request | Answers | |
| 2002 Buick LeSabre Custom 3.8L Misfire VIN: 1G4HP54K92 All tech please help, this car only misfire under load when in gear and accelerate or in gear above 1900 RPM. No missed at idle in gear or in "P" with 3000+ RPM. I back probe #6 injector and got signal from ECM when under load in gear and above 1900 RPM when i... Trouble codes: P0300 (Random Misfire), P0306 (Cylinder 6 misfire detected) |
View | |
| 2006 Chevrolet Colorado LT 3.5L Ecbm VIN: 1GCCS19656 Vehicle arrived with a moderate brake pulsation complaint,brakes were worn out, Machined front rotors & rear drums, Replaced front Calipers & Pads & replaced rear shoes & cylinders, afterwards during test drive realized ABS system was activating for less than ... |
View | |
| 2006 Chevrolet Silverado 3500 LT 6.0L Airbag Light Hello I don't need any help with this problem. I found the answer, but anyone interested in reading what I figured out, and anyone who has something to add to my findings or their own experiences with these codes feel free. I wanted to put this on IATN, becaus... |
View | |
| 1996 GMC K1500 Suburban SLE 5.7L 4x4 VIN: 1GKEG13R8T Truck came in with no 4x4. checked switch, axle actuator, and powered motor direct. all good. checked power and grounds, all good. Replaced tccm, now 4lo works. when 4hi is pressed it lights 4lo and goes into 4lo only. I know the switch flows 12V to tccm when ... |
View |
Fixes & Summaries for GM
| Fix/Summary | Answers | |
| 2001 Cadillac DeVille 4.6L Ebcm VIN: 1G6KD54Y41 Thanks to everyone who helped, William was the closest, we had checked the pin tension in the EBCM connector, but upon re-checking it further we noticed the heavy ground at pin G was a little loose when locking the connector shut, I still find it hard to belie... |
9 |
