 Prev |
Professional Automotive Repair Technical Discussions for January 11, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2002 Dodge Ram 1500 ST 5.9L Poor Idle Quality, Cuts out, Lacks Power VIN: 1D7HU18Z92 Sorry for the long post. Just bare with me. This trucks main issue is a lack of power at high RPMS. If you go full throttle, you have plenty of power up to about 4K RMPs. After that you can feel the horsepower steadily decline to the point where in second gear... |
View | |
| 2008 Dodge Grand Caravan SXT 3.8L ABS module VIN: 2D8HN54PX8 Hello, I have a stumper here, I thought it was going to be cut-n-dry, but no such luck. Start the van and drive it, at @ 25mph the ABS lite comes on. C1073 ABS pump motor control circuit. OK, hit the trouble tree. Step one verify the code is current, check, go... |
View | |
| 2007 Jeep Grand Cherokee Limited 3.0L No Start VIN: 1J8HR58M57 First off thanks for reading!! I do not do much diesel work. Jeep came in no start. died on them driving down the road. they said a red lighting bolt flashed on the dash then lost power. Has no tuner in it. it is stock. Battery was basically dead so I charged ... Trouble codes: P0087 (Fuel Rail/System Pressure - Too Low) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Chrysler PT Cruiser 2.4L no crank, towed in VIN: 3C4FY48B42 I found some wiring diagrams from alldata, then verified the appropriate wires were getting power and ground as the key was being switched on. I checked the ASD relay, the neutral safety switch and starter relay were in fact powering up. Then verified no signa... |
12 |
