 Prev |
Professional Automotive Repair Technical Discussions for December 14, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 1996 Dodge Ram 2500 5.9L smokes VIN: 3B7KF23C6T I got one here just trying to to pinpoint down better. veh came in with oil leak. Dye test found push rod inspection leak. insp truck prior to tear down. I found that it seemed to have a crank no start at times after shut off. cycle key and try to start before... Trouble codes: P0403 |
View | |
| 2005 Dodge Ram 1500 ST 5.7L Misfire VIN: 1D7HU18D15 greetings to all have this ram pickup that has a little miss under load.I set cruise control on 60 and under an incline it will miss driving with solus plugged in and looking at misfire counts i can see that cylinder 1 will miss.I swapped plugs and coil to ano... |
View | |
| 2008 Dodge Ram 2500 SLT 6.7L MIL Lamp on VIN: 3D7KS28A88 Good morning looking for some assistance on the diesel. Truck was in for check engine light, no drivabilty complaint. pulled codes and found p0488 EGR throttle control circuit performance. Followed flow chart , unplugged connector and watched for circuit high... Trouble codes: P0488 (Egr airflow throttle control circuit performance) |
View | |
| 1986 Plymouth Reliant SE 2.2L No Start, No spark VIN: 1P3BP39DXG Calling on old time Chrysler techs!!! I have an 86 Dodge Aries, 2.2, causing some hair loss. To make a long story short- installed new engine. Now I have no spark! But, I do have fuel (pump & injector pulse). Luckily customer has many extra parts. Therefore, I... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2012 Ram 3500 ST 6.7L Cuts out, MIL Lamp on VIN: 3C63D3GL7C Check engine light on and Codes P0102 (mass air flow sensor circuit low) and P245C (EGR bypass control valve circuit low) stored inthe computer. Sometimes unable to clear the codes. Checked all wiring with an ohmn meter and a lab scope. Replaced the TIPM (sma... Trouble codes: P0102 (Mass air flow sensor A circuit low), P245C. |
5 |
