 Prev |
Professional Automotive Repair Technical Discussions for November 16, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2004 Dodge Ram 2500 ST 5.9L Cold Starting VIN: 3D6WU26C94 Okay we are at a loss on this vehicle. Customers original complaint was vehicle hard to start cold or wont start at all. Plug block heater in for one hour. Starts fine. We have done all the pin point tests per direct hit. Everything was a pass. The fuel heater... |
View | |
| 1996 Jeep Grand Cherokee Laredo 5.2L gauges,windows compass VIN: 1J4GZ58Y3T If you hold the key towards start a little past run the gauges will operate but stop when releaseing the key back to run.Power windows will work during holding key forwards as well. No communication at ALDL with any module even when key is held and gauges work... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2005 Jeep Wrangler Unlimited 4.0L hard start VIN: 1J4FA44S25 Thanks to all that replied !!! This one is FIXED - after many test along with many good drives - we were hesitant to return it to our customer Then it happened, started pushing connectors tighter as my tech watched and then as a pushed the TPS connector tight ... Trouble codes: P0123 (Throttle position sensor no. 1 high). |
4 | |
| 2008 Jeep Liberty Sport 3.7L blend door VIN: 1J8GN28K48 Thanks to all who replied I ended up replacing the air distribution box it had warped door and goo from foam gaskets causing doors to hang up. The new dealer part has all rubber seals no foam tape that turns to goo. |
7 | |
| 2011 Ram 3500 Laramie 6.7L Shifter VIN: 3D73M4HL8B Sorry for the delayed fix. We tried a few different things and it took some time to test each attempt at repair. The clutch worked so well except for the disengagement issue that the owner and I decided to try some things before we removed the clutch. We tried... |
12 |
