 Prev |
Professional Automotive Repair Technical Discussions for September 21, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1965 Ford Thunderbird 6.4L turn signals VIN: 5Y83Z11321 I cant get the right side to light the left side works.I put a bearing in the steering shaft and the customer says they were working prior to that.I check for power from the switch at the base of the column and I GET AN IMPUT FROM THE SWITCH.I cant find a usab... |
View | |
| 1993 Ford Ranger STX 2.3L Transmission VIN: 1FTCR10A9P We rebuilt this a4ld transmission about 3 months ago and it has come back with harsh shifts in every gear, checked vacumn to modulator all is good there replaced valve body and still no change the linkage seems to be on point as well. Has anybody run into this... |
View | |
| 2002 Ford E-250 Econoline 5.4L hard start hot VIN: 1FTNE24LX2 Hi All, Customer complaint is a hard start when hot. Code P0125-insufficeient coolant temp. Engine temp reads normal in dash, but -7 to 26 F on scan tool. Instrument cluster shares the ECT sensor. Unplugged I have battery voltage at the ECT and a good ground. ... Trouble codes: P0125 |
View | |
| 2003 Ford F-150 XLT 4.6L Master Cylinder VIN: 1FTRW07673 Truck came in with suspension noise and replaced lower control arm and ball joint. On test drive brakes would fade after they warm-up. Pedal feels great for 5 minutes ! on slow gradual stop you loose 80% of pedal. Truck has new master cylinder, calipers, and p... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1994 Ford Ranger STX 4.0L Stall VIN: 1FTCR15X6R Thanks for everyone for helping on this, it turned out to be the mass air flow sensor,I got a reman from local parts store and immediately it run better and was fixed, customer took vehicle and about 3 days later it started running ruff again, so I ordered one... Trouble codes: 341 (CMP sig noise/octane adj pin used). |
13 | |
| 2003 Ford Escape Limited 3.0L power steering pump VIN: 1FMCU94193 After I put 2 master pro reman pumps on it and still did not work,i got new one from ford and it fixed it.thx |
11 | |
| 2010 Ford Fusion SEL 2.5L Poor Idle Quality, MIL Lamp on VIN: 3FAHP0JA6A ok not sure if we fixed or not but tighten all pins at throttle body and computer. customer says he has not had any more problems since them. thanks for all the good advice. Trouble codes: P2112, P2119. |
3 |
