 Prev |
Professional Automotive Repair Technical Discussions for September 2, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2005 Chrysler 300 C 5.7L MIL Lamp on VIN: 2C3AA63H55 Checked pids I on witech and showed oil pressure 1 psi and .56 volts KOEO and Mastertech was showing .1 psi and .56 volts KOEO. If I cleared code and did not cycle key and started engine code would not set, nor in pending. cycle key and it would be there befor... Trouble codes: P0522 (eng. oil pressure circuit low) |
View | |
| 2001 Dodge Ram 2500 5.9L Steering VIN: 3B7KF26791 We have a problem with the steering when truck is warmed up. The steering becomes very hard ( high effort to turn the wheel). We have flushed the power steering fluid 3x (ATF+4), have checked the pressure output from pump 1400-1450psi, Raised the front end off... |
View | |
| 2007 Dodge Ram 2500 TRX4 5.7L Poor Idle Quality VIN: 3D7KS28D87 Truck will idle rough like a cylinder is missing. Have no codes and no misfire counts. Vacuum is 20 inches steady. Cut off injectors one at a time with scanner. All seem fine. Have changed all 16 spark plugs. Old ones were worn but all had a light tan color to... |
View | |
| 2008 Jeep Wrangler Unlimited Rubicon 3.8L sway bar VIN: 1J4GA69168 Local body shop installed new front dif and now auto swaybar connect/dis connect wont work, light just flashes, was seeing if there was a relearn procedure couldn't find any info nothing on sway bar was replaced just disconnected any info would be great thanks... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers |
