× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 31, 2015
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1992 Ford F-150 Custom 5.0L No Start VIN: 1FTDF15N1N
Hi, every one: first i need to tell you i have not work on this old one for a long time ,because we don`t have those test equipment any more. This truck came in on hook due to no start problem. Fuel pump was the problem, fuel pressure was (0), so we installed ...
View
1997 Ford F-150 Lariat 4.6L Heater Core VIN: 1FTPX176XV
This truck has an electrolysis issue. Repeat heater core problems. Showing 0.4 volts at idle in the cooling system. If I feed a grounded jumper into the coolant bottle, it drops to about 0.3 volts (this is with contaminated coolant - before any flushing). I re...
View
2004 Ford F-250 Super Duty XL 6.0L Engine VIN: 1FTNF20P64
Hello, Im having a issue with this 2004 ford f250 6.0 diesel, when it is cold it runs perfect but when it warms up, say right after driving it down the interstate, it starts to miss on all cylinders but more so on 1 and 8. If you let it sit for 15 mins and sta...
View
2008 Ford F-450 Super Duty XL 6.4L No Start VIN: 1FDXW47R08
This truck towed-in by a customer with no-start symptom. Checked the ecm and found a fault code of P2291 and data showed low and fluctuating high fuel pressure while cranking. Checked primary fuel pressure and volume and found them within spec. Replaced high p... Trouble codes: P2291 (Icp too low during engine cranking)
View
2008 Ford F-150 Lariat 5.4L Cuts out, Misfire VIN: 1FTPW14VX8
Looks like bad grd wire but measured voltage at pin 5 maf connector when running showed system volts Measured voltage a pin 5 koeo showed 10.5v Cleaned gfd at right firewall cant find s199 slice not where Mitchell shows it on breather box Anyone heard of wirin... Trouble codes: P0068 (Maf Low Voltage), P0102
View
2010 Ford E-350 Super Duty 5.4L No Shift When Pedal On Floor VIN: 1FTSE3EL6A
Ok this what i have owner says wont shift with pedal on the floor which it will not during test drive it shifts normal under all conditions except when pedal is on the floor until let up slightly every thing looks good even tryed a tps no change pcm was replac...
View

Fixes & Summaries for Ford
Fix/Summary Answers
2006 Ford F-350 Super Duty XLT 6.0L Unknown VIN: 1FDXE47P36
thanks for all who have helped, it wound up being the fan cluth, clutch was not bad but another shop that had this vehicle apart had pulled the fan clutch wiring and it was getting intermittent connections going down rough roads around here, replace fan clutch...
15
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next