 Prev |
Professional Automotive Repair Technical Discussions for July 31, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2001 Chrysler Sebring LXi 3.0L unknown VIN: 4C3AG52H01 Had this sebring come in for a heater core and ended up replacing the evaporator as well. A/C seemed weak after that. Hooked it up to the gauges and saw odd pressure readings so we tried a different expansion valve and it seemed to level them out. About a week... |
View | |
| 1996 Dodge Ram 1500 5.9L trans VIN: 3B7HF13Z7T this thing won't shift if you take rpms up driving it and let off throttle then you will see gears change on scanner but not the truck.I don't have b+ on pin 1 of trans connector.Checking at the relay koeo i will get b+ for a couple second then drops to .050 v... |
View | |
| 2009 Dodge Challenger SRT8 6.1L abs VIN: 2B3LJ74WX9 I have this 09 challenger, when accelerating, every time you hit 23 mph, the traction control light flashes, the abs pump comes on, the throttle backs off and the left front brake is applied, as if the vehicle is having some sort of esp or traction control eve... |
View | |
| 2002 Jeep Liberty Limited 3.7L Lighting VIN: 1J4GL58K92 Customer stated that a couple times the headlights have gone out, the interior lights are sometimes inop, and interior lights came on with turn signals. Of course it is extremely intermittent. I'm suspecting the BCM, but would like some proof before replacemen... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1996 Chrysler LHS 3.5L MIL Lamp on VIN: 2C3HC56F9T Thanks for your help, reflashing did not work so we replaced the PCM and light went out, thanks again Jay Trouble codes: 1696 (denied eeprom writ). |
6 | |
| 2002 Jeep Liberty Limited 3.7L Stall VIN: 1J8GK58K52 Thanks for the great replies. A crank sensor fixed this one. I was told that when the sensor shorts it will drop the 5 volt signal causing the stall and lack of communication. Cheap and easy fix. Trouble codes: P0320 (No Crank Signal at PCM). |
13 |
