 Prev |
Professional Automotive Repair Technical Discussions for June 11, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2006 Chrysler PT Cruiser 2.4L No Start, Misfire, MIL Lamp on VIN: 3A4FY48B46 Vehicle was parked outdoors for over 1 year, only problem before being parked has been that intermittently all the gauges would swing back and forth but car always ran and started with no problems. Customer has owned car since new, states it had been back to d... Trouble codes: P0463 |
View | |
| 1999 Dodge Durango SLT 5.2L blower motor VIN: 1B4HS28Y7X all fuses are good. all grounds are good. ohm tested the switch and the resistor. power coming from relay is good but there is no power at the blower motor connector. I know it has to be a bad connection or a broken wire but does anyone seen this or know of a ... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2001 Dodge Durango SLT 4.7L Poor Idle Quality, Cuts out, Stall, Misfire VIN: 1B4HS28N21 thanks to all that replied checked timing chain today it did jump waiting for the goahead thank for the input |
3 | |
| 2006 Dodge Ram 1500 Sport 5.7L MIL Lamp on VIN: 107HU18286 I fianlly got the truck back in - owner couldn't give it up. I decided to jumper the connector under the L/F fender and verify I had power coming back to the gauge - nothing. I lowered the tank and found the gauge feed wire had backed out of the connector just... Trouble codes: P0463 (Fuel level sensor circuit high). |
4 |
