× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 4, 2015
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2003 Chrysler PT Cruiser GT 2.4L cooling fan INOP VIN: 3C8FY78G83
Vehicle was brought in to my shop over heating with a blown head gasket and cooling fan INOP. Removed head and sent to the machine shop. Head was surfaced and pressure checked ( OK ) . Tested cooling fan and found fan motor burnt up. Replaced head gasket and c... Trouble codes: P0688 (ASD Relay Sense Voltage)
View
2004 Chrysler Sebring Touring 2.7L No Start VIN: 1C3EL55R84
Vehicle was towed in for no start, no crank, batt dead on arrival. Customer describes he drove the vehicle and parked it, came back from lunch with a no start. Code P1200 was stored six times in the TCM with three different definitions after attempting to sta... Trouble codes: P0012, C0079, P1200, P1200, P1200
View
2005 Dodge Sprinter 2500 2.7L No Start, Stall VIN: WD0PD64465
I responded to this truck stopped on the side of the road, with a scanner a test light and a smart phone. Determined the failed fuse and proceeded to unplug all ECM driven actuators, fuel solenoids, rail and pump mounted, waste gate actuator, glow plug relay e... Trouble codes: P2199 (Fuel quantity solenoid short to ground), P2502 (Fuel quantity solenoid short to ground), P2152 (Starter relay circuit short to ground), P1615 (ECM supply voltage low)
View
1975 Jeep CJ5 5.0L No Start
Thanks in advance for any help,working on a 75 cj vehicle was towed in for engine noise but was a crank no start when i got it all plugs were fuel fouled replaced all spark plugs too start also removed fuel line at carburator and verified operation of fuel pum...
View
1993 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4GZ7853P
This Jeep came in with multiple issues. The ignition switch was bad so we replaced it and the customer replaced the crank sensor. It's getting spark but not a sustained injector pulse. It will start and run if we spray gas in the intake. We scoped the cam sens...
View
2007 Jeep Grand Cherokee Laredo 3.7L Poor Idle Quality, Cuts out, Stall VIN: 1J8GR48K07
OK, Jeep came in on the hook, died while driving. No codes present, or pending. Won't run or idle without foot on the gas, and wont start without foot to the floor. Plugs were 100 years old so replaced those and could smell raw fuel in cylinders. Truck runs li...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2007 Chrysler Sebring 2.4L Won't fill VIN: 1C3LC46K77
THANKS for the replies! Looks like a vapor canister is the best bet! I have one ordered, but the owner has not returned...
11
2004 Dodge Ram 2500 SLT 5.9L lamp out message VIN: 3D7KU28C84
OK first off thanks to everyone that replied with suggestions, end result ended up just being the fact that someone recently replaced the headlamp lenses with TYC brand housings which come with (black) front turn signal sockets, these DO NOT work well apparent...
13
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next