|Prev||Professional Automotive Repair Technical Discussions for May 28, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2005 Honda Accord EX 3.0L No Start VIN: 1HGCM66505
Car came in for student lab work in vocational setting. Fuel pump relay was removed for testing and failed due to control coil reading 0-2 ohms. When reinstalling relay the car failed to start. Replacement of relay did not correct problem. Jumping the outp...
|1997 Nissan Maxima GLE 3.0L MIL Lamp on VIN: JN1CA21D7V
The first time we found the passage in the intake clogged behind the IAC. Cleaned it out and noticed a significant r.p.m. drop. Second time the EGR solenoid would intermittently malfunction, although it worked perfectly the first time. This time we find nothin... Trouble codes: P0400 (Egr system problem)
|2013 Nissan Murano SV 3.5L Poor Idle Quality, Misfire, MIL Lamp on VIN: JN8AZ1MW6D
im hoping for some guidance or help with 2013 nissan murano 3.5L car came into dealer for rough run and mil on found vacuum leak at broken vacuum line under engine cover at a vacuum control solenoid and dtc's p0300 multiple cylinder misfire and p0171 system le... Trouble codes: P0300, P0171
Fixes & Summaries for Asian
|2003 Honda Civic LX 1.7L brake pedal VIN: 2HGES16553
sorry for the delay but the fix was re torqueing the pedal assembly to proper speck it felt tight by hand but the bolts were loose enough for the assembly to move
|2003 Hyundai Elantra GT 2.0L MIL Lamp on VIN: KMHDN55D23
Thanks everyone well replaced both sensor oem and found no leak add ground wire CODE still keep coming back.i end up issue wavier for emmision inspection.code keep coming back still unsolved mistry. Trouble codes: P0133.
|1999 Toyota Camry CE 2.2L Engine VIN: 4T1BG22K6X
Ok, I'm sorry to say that customer has decided to scrap the vehicle. He wanted me to put a new crank and bearings in it, but I talked him out of that idea with all the metal in this engine and showed him cam journals. We made this decision because we discovere...