|Prev||Professional Automotive Repair Technical Discussions for May 21, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2005 Chrysler 300 Limited 3.5L limp in VIN: 2C3JA53G25
limp mode p0765 ud circut I do not have power @ the solenoid pack. Wiring from relay to trans is good. pin 30 on relay b+ pin 86 from pcm has 6 volts at alltimes at pcm and at relay 86 I'm thinking that should be b+ and that the pcm might be at fault. All powe...
|2004 Dodge Dakota 3.7L MIL Lamp on VIN: 1D7HG12K44
We put 10, then 40 miles in 2 trips on this reman engine prior to returning to customer. He gave vehicle to his son 100 miles away. Mil came on, son took it to his independent shop where they replaced B2S1 for a P0153 (O2 not switching). Didn't help. When it w... Trouble codes: P0153 (B2S1 not switching stays .860 volts)
|2001 Jeep Grand Cherokee Limited 4.0L Mic Bus VIN: 1J4GW58521
We have got trouble with the BUS. We tested first for communications with the Scan Tool. (MAXIDAS, Verisys and Modis) We can communicate with the PCM Only. We have Disconnected the MIC (mechanical Instrument Cluster) the BCM the overhead console the Drivers do...
Fixes & Summaries for Chrysler
|2007 Chrysler Town & Country Touring 3.8L Airbag VIN: 2A4GP54LX7
Sorry it took me so long to close this post but unfortunately after several appointments and the customer never showing up I have decided to close this one, unresolved. I'd like to thank every one who took the time to reply, i did find all of the information ...