 Prev |
Professional Automotive Repair Technical Discussions for April 11, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Asian
| Help Request | Answers | |
| 2000 Acura TL 3.2L No Start, Misfire, MIL Lamp on VIN: 19UUA5663Y Good afternoon, this problem began serveral months ago as far as we can tell. Customer reported MIL - we verified misfires and installed a set of NGK spark plugs ( as recommended by Worldpak ). A few months later, misfires again, we installed a set of ignition... Trouble codes: P1399, P0301, P0304, P0170, P0171 |
View | |
| 2002 Isuzu Rodeo LS 3.2L Hesitation, Misfire VIN: 4S2DM58W32 This vehicle has an intermittent misfire with code p0355 ignition coil e circuit fault it is a random thing sometimes it runs fine other times it runs terribly, has anyone else had a rodeo with this problem Trouble codes: P0355 (Ignition coil e circuit fault) |
View | |
| 2007 Toyota Matrix XR 1.8L fan speed VIN: 2T1KR32E17 Car has a/c, makes only 150lbs. On the high side, 20 psi on the low. High spped fans engage as soon as the ac is turned on. Keeping pressures so low, it kills the compressor on the gas. Have replaced all above and # 2 fan relay, wich controlls ground to the fa... |
View |
Fixes & Summaries for Asian
| Fix/Summary | Answers | |
| 2010 Hyundai Santa Fe GLS 2.4L Misfire, bangs VIN: 5NMSGDAB1A Well thanks to Geoff he was right on it. The electromagnetic coupler on the front of the rear differential is bad. When this unit is unplugged the symptoms go away. If you plug it back in they come right back... Thanks to all who replied. |
7 | |
| 2001 Mazda Tribute ES 3.0L Mechanical VIN: 4F2CU08131 Hi guys, I'd like to thank everyone for their help. I guess I have to call this fixed, although I'm not completely satisfied, it does brake better than when it came in. I did smoke for vacuum leaks, didn't find any. I got good flow from all bleeders as well. ... |
12 |
