|Prev||Professional Automotive Repair Technical Discussions for April 10, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2010 Chrysler Town & Country Touring 4.0L Stall VIN: 2A4RR5DX7A
Customer brought vehicle in with a complaint of intermittent stall. The problem seemed to occur within the first 5 miles of driving, usually when off the throttle and it always restarts right away. There are no codes and the problem was so random that I drove ...
|2001 Dodge Durango R/T 5.9L No Start VIN: 1B4HS28ZX1
Able to communicate with all modules except PCM. Disconnected, one at a time, all sensors and transmission connector. Transmission connector wires are bare. All other wiring and connectors appear to be ok. Assumed possible bad PCM. Customer supplied another ...
Fixes & Summaries for Chrysler
|2008 Dodge Ram 1500 ST 4.7L Valve Noise VIN: 1D7HA18N88
After a couple of additional days and 150 +/- miles I'm going to call this a fix although not a perfect one. We went back and changed oil one more time to full synthetic 5w-20 and a good filter and found the noise to be almost completely gone (only a slight ta...
|2008 Dodge Nitro SXT 3.7L headlights, power door locks VIN: 1D8GT28K08
Customer traded-in vehicle, said there were other numerous problems, GREAT MOVE!!!
|2007 Jeep Commander 3.7L cooling fan VIN: 1J8HG48K57
Iye! Chyslers and their wiring can lead you in the wrong direction sometimes. The problems turned out to be a bad 50amp fuse and a bad fan motor. For the life of me I don't know why the fan has multiple fuses one of them being a 50amp not marked fan. Just a 50...