|Prev||Professional Automotive Repair Technical Discussions for April 7, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1993 Dodge Grand Caravan LE 3.3L Cluster VIN: 1B4GH54R7P
Hello all. Another stumper for me, (my second post in twoo weeks. lol). It arrived with concern that the instrument panel was inoperative. I confirmed this; only the 'check gauges' indicator illuminates. All guages and lights dead. A homeless couple live out o...
|2005 Dodge Sprinter 2500 2.7L No Start, Cuts out, Stall VIN: WD5PD74475
Unit will stall after driving 20-30 minutes, crank but no start for about 10-20 minutes then start. This process happens repeatedly and has been happening more frequently. Had at another facility prior to us that said to replace cdi, cam sensor, repair wiring ... Trouble codes: P0305 (p1481), P0003 (c3700), P292E, U3112 (b0300), B0312 (p1354), P0414 (p0190)
Fixes & Summaries for Chrysler
|2008 Chrysler Town & Country Touring 3.8L No Start VIN: 2A8HR54P88
Fixed the impossible once again. It did take the WiTech to complete the process but the main item that had to happen was to do a vehicle configuration. Since the TIPM, PCM, and WIN were new there was no module that belonged to the vehicle and without one the...
|1990 Dodge B250 5.2L No Start VIN: 2B6HB21YXL
WOW! 36 replies. Thanks very much. It is FIXED, but before I elaborate, here is what fixed it: oxygen sensor, oil change and hard reset (cables, not scanner). She purrs. As for the high fuel pressure, I tested everything; regulator, throttle body, lines and... Trouble codes: 41 (Alternator field circuit), 51 (too lean), 15 (missing VSS signal), 45 (OD solenoid circuit fault).
|2009 Jeep Wrangler Unlimited Sahara 3.8L Safety VIN: 1J4GA59139
After several days truck is finally fixed...what needed was a dealer flash of insterment cluster...Found nothing coming out of cluster on horn circuit , that is why the fuse box relay never did receive a signal to close and supply power to the horn fuse...Had ...