|Prev||Professional Automotive Repair Technical Discussions for March 25, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1996 Ford E-350 Econoline Club Wagon XLT 5.8L Unknown VIN: 1FBJS31H5T
Customer came in with brake pedal low/spongy feeling concern. Another shop replaced brake booster, master cylinder, front calipers. We checked rear shoes and wheel cylinders; no problems found - adjusted rear brake properly and bled entire brake system startin...
|2001 Ford Windstar Limited 3.8L heater VIN: 2FMDA58441
Hi everyone and thanks in advance. This van came in on our wrecker after owner said it overheated (got to close to the red line for owners comfort). So I ran it in drained the fluid and I removed the thermostat put it back together and flushed the cooling syst...
|2009 Ford Explorer XLT 4.0L EVAP System VIN: 1FMEU63E49
Smoked for EVAP leak and found leak at capless flap in fill neck. After replacing leaking fill neck we erased DTC P0442 and it comes back immediately. We smoked again and found no leaks. Running IDS system tests we had random passing, failing to hold vacuum, a...
Fixes & Summaries for Ford
|1991 Ford F-150 Custom 5.0L forward gears VIN: 1FTDF15N5M
found out what was bad in it and had it replaced but the son of a gun popped again.got one out of another truck five times cheaper than goin thru it again on the road again.thanks to all on this one.had a lot of fun in and out twice but learned from it thru yo...
|2002 Ford Taurus LX 3.0L MIL Lamp on, high idle VIN: 1FAFP55S42
First let me thank everybody for there help. The PCV valve was the culprit. For those suggesting the IAC what I ment by it testing fine was every position I commanded it to it went to all the way from 0%-100% so I knew it was ok. Blocked off the pcv and my ... Trouble codes: 1506 (iac overspeed error).