|Prev||Professional Automotive Repair Technical Discussions for March 13, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2005 Chrysler Town & Country Touring 3.8L MIL Lamp on VIN: 2C4GP54L25
This is my wife's van. The problem first showed up about 2 1/2 years ago and everything at that time pointed O2 sensors. After going crazy over them I finally bought OEM MOPAR sensors using the emission label ID number to get the correct ones. Numbers matched ... Trouble codes: P0420 (Catalytic Converter 1/1 efficiency)
|2002 Dodge Ram 3500 5.9L Surge, Stall VIN: 3B7MC33672
On take off, this truck will have a stall or rpm limit right at 2000 rpm, or 20 miles an hour if it is going to happen. light throttle or open throttle, it has to have this 5 second wait. It doesn't always happen, but if it does it, is the first drive off. Onc...
|2004 Dodge Sprinter 2500 2.7L Excessive Emissions VIN: WD5PD64324
Vehicle came in for no start cold, found glow plug shorted out and module only powering 3 glow plugs. Glow plugs seized in head and #2 injector leaking a lot of black sledge. customer gave ok on removing head, reseal injectors and extract glow plugs. All went ...
Fixes & Summaries for Chrysler
|2001 Dodge Ram 2500 5.9L No Start, no communication VIN: 3B7KF26661
Well, I have not actually fixed this truck yet, but have determined that the ecm is in fact bad. I would like to thank everybody for their replies, some of which were certainly helpful and informative. With the generosity of a friend, I was able to borrow a kn...
|1969 Plymouth Fury Sport 6.3L steering gear VIN: PH27H9D272
thanks again to all that replied it was of great help. Al nailed It the steering coupler was very stiff and binding. after removing the steering column I started the engine and I could turn the wheels left and right. did a clean up and lube of the flex coupler...