|Prev||Professional Automotive Repair Technical Discussions for March 5, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
Open Help Requests for Chrysler
|2003 Chrysler Town & Country LXi 3.8L Coolant in engine oil VIN: 2C4GP54L03
Vehicle came in with coolant mixed in engine oil. I've pressure tested the cooling system with no drop for over an hour. I did a search, not seeing any typical failures for these engines, leaning towards intake or timing cover gaskets. Would like some input be...
|2004 Dodge Ram 2500 ST 5.7L Hvac VIN: 3D7KU28D64
Any ideas on getting a low side quick connect disconnected it was soaked over night and every tool in the shop was used to try to get it Tech thinks we will have to cut it and replace the pieces does anyone have any suggestions?
Fixes & Summaries for Chrysler
|1997 Chrysler Sebring JX 2.5L Stall VIN: 3C3EL45H4V
thanks for all the help but this car still isn't fixed. i ended up putting in an ignition swich, ckp sensor,distributer,and iac motor.i have watched every waveform. the k line for dropouts or weird patterns,and only once have i recorded it when it acted up. th...
|2005 Dodge Sprinter 2500 2.7L no crank VIN: WD2PD64455
thanks to all! van towed to dealer for key coding. finally talked to sprinter tech and he gave me low down.
|2007 Jeep Grand Cherokee SRT8 6.1L park lamps and over head lamps VIN: 1J8HR78337
I ran new wires from PCM field and sense wire this and complete removal of wiring from aftermarket high voltage ballasts for headlamps these were disconnected earlier with no difference I did not start this repair it was handed off after Someone else at the d...