|Prev||Professional Automotive Repair Technical Discussions for March 1, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
Fixes & Summaries for Chrysler
|2007 Dodge Ram 1500 SLT 5.7L Heater VIN: 3D7KS19D57
Thanks for the replies. We removed the plenum and checked the blend doors, no warpage, they seal well, and the actuator moves them properly. The mode doors also are ok. Replaced the aftermarket heater core with a Chrysler unit and cured the problem. Heat outpu...
|2013 Dodge Grand Caravan SE 3.6L transmission VIN: 2C4RDGBG0D
Problem returned a couple of days later. It would not occur until after 15 minutes driving and would set various codes with 2 being prevalent, 841 for low/reverse pressure solenoid switch and 846 for 2/4 pressure switch. I found excellent info at ...
|2009 Jeep Grand Cherokee Laredo 3.7L Starter VIN: 1J8GS48K99
AS MANY OF YOU SUGGESTED,THE SOLONOID WIRE AT THE STARTER HAD A BAD CONNECTION.IT LOOKED GOOD INITIALLY,BUT UPON REMOVAL OF THE LOCKING CONNECTOR,THE CONNCTION WAS SEVERELY DEGRADED.JUST PUT THE NEW CONNECTOR ON THE SIGNAL WIRE AND ALL IS WELL.THANKS TO EVERYO...