|Prev||Professional Automotive Repair Technical Discussions for January 3, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2007 Acura MDX 3.7L Unknown VIN: 2HNYD28347
I have an AWD MDX that is driving me nuts. When performing a hard left turn, under power, there is a loud knocking noise from what sounds like the right front. The truck does not make this noise when turning right. I stand here guilty of a shotgun approach to...
|2006 Kia Amanti 3.5L Unknown VIN: KNALD12446
makes vibration type noise from around the drive belt area only in gear under slight load forward or reverse. noise is gone in park and if I remove the drive belt(alternator-a/c)I tighten belt because it was flopping a lot during the noise but it didn't stop t...
|2006 Mazda 5 Sport 2.3L headlights VIN: JM1CR29LX6
Car cam in with no working headlights, checked the fuse and found both fuses for the low beam were blown so we replaced it. Tried the headlights and still nothing. Maybe the bulbs were bad? Nope, check for power and no power to either headlight sockets.
|2008 Subaru Impreza WRX 2.5L Ecu VIN: JF1GE75688
Hi Guys my personal ride (wifes car) needs state inspection.I originally had a p0420 code that comes on every few months.After clearing,i reset the monitors by recommended drive cycle specs,but the secondary air and o2 monitors don,t turn ready.I have cold sta...
Fixes & Summaries for Asian
|2004 Nissan Murano SE 3.5L engine
We have not yet installed this engine as we have been too busy with other work. We plan on dropping eng/trans with subframe as some suggested. Thanks for the replies.