|Prev||Professional Automotive Repair Technical Discussions for December 23, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2010 Dodge Journey SE 2.4L Low Reverse Solenoid Circuit VIN: 3D4PG4FB6A
The vehicle came into the shop originally with a P0750- Low Reverse Solenoid Circuit and P0731- Gear Ratio Error in 1st. The transmission filter was full of clutch material so we had pulled the transmission out and rebuilt it. Only to find the torque convertor...
|2004 Jeep Liberty Limited 3.7L Low Power VIN: 1J4GK58K04
Customer states vehicle has low power on accel. Found transmission shifts to high gear too soon and has no 3-2 downshift. I got this one after the TPS was replaced. Of course they never told me another shop already looked at the problem and did the repair wit...
|2011 Ram 1500 Laramie 5.7L no turn signals or instrument lights VIN: 1D7RV1GT9B
No turn signals are working and we have no dash instrument lighting up. Truck was recently rust check oil sprayed, Checked under hood grounds all good as tested. Where should we look?
Fixes & Summaries for Chrysler
|2007 Dodge Sprinter 2500 3.0L No Start VIN: WD0PE84557
Good replies, thanks to one and all. Gilbert and Steve set us on the right track, I'll tack Steve's reply to the end of this post. We ponied up and bought the tools online to measure fuel injector leakage back through the return lines (not expensive at all). ...
|2010 Dodge Ram 1500 SLT 5.7L 4x4 VIN: 1D7RV1CT7A
Thank all. Replaced front axle actuator. Looks like control circuit was being pulled low by the actuator.