|Prev||Professional Automotive Repair Technical Discussions for December 22, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2001 Ford Explorer Sport Trac 4.0L Poor Idle Quality, Misfire, Poor Fuel Economy VIN: 1FMZU67E61
Hello fellow techs! ok so customer came to me after some one did this work to his vehicle. Ran great for a few days this started running rough at idle.off idle he says runs fine.i doubled checked the work and i dont see any human error's.so i hooked up my scan...
Fixes & Summaries for Ford
|2002 Ford Explorer XLT 4.0L transfer case vss VIN: 1FMZU73E52
Module replacement was only half the problem. I replaced the pin at the 4x4 module and corrected the vss loss of power. The module only corrected the loss of data stream.
|2004 Ford F-150 XLT 4.6L Security Module VIN: 1FTRW12WX4
THANKS TO ALL THAT REPLIED. THIS IS THE SECOND TIME WEVE HAD TROUBLE PROGRAMMING A FORD. THE FIRST TIME ANOTHER SHOP BROUGHT IN A PCM THAT ENDED UP HAVING A BAD TCM THAT WOULD STOP THE PROGRAMMING. UNPLUGGED THE TCM AND THEN WOULD PROGRAM. THIS TIME WE FOUND ...
|2007 Ford Crown Victoria Police Interceptor 4.6L Stall VIN: 2FAFP71WX7
Thanks for all the replies. Some suggested to clean throttle body and reset KAM, which we had already done..(see previous repair history). We also replaced the canister to no affect but correcting the slightly rich fuel trims immediately following command purg...
|2010 Ford F-150 FX4 5.4L Right cylinder head VIN: 1FTFW1EV8A
Good afternoon techs! Just wanted to follow up with this fun job! It was infact not as bad as originally thought to remove the cab from the frame to service the right head. The vehicle is fixed and gone! everything worked out great. Once again thanks for all t...
|2011 Lincoln MKS EcoBoost 3.5L Hvac VIN: 1LNHL9FT8B
As of now, I will call this one a "may be" fixed. Most replies mentioned possible air pocket. Found a method for bleeding the air for the Taurus SHO models and seems to be working. Need to remove cap, get engine up to temp, run engine rpm up to 2000-3000 for a...