|Prev||Professional Automotive Repair Technical Discussions for December 6, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2006 Chrysler PT Cruiser 2.4L No Start, Poor Idle Quality, Cuts out VIN: 3A4FY48B96
Vehicle was towed in not running with a burnt exhaust valve. Replaced cylinder head with a reman cylinder head. Replaced the igntion coil, spark plugs, spark plugs wires, downstream O2. Timing marks are on. Starts hard & when it does run you have to keep it re...
|2008 Dodge Ram 2500 SLT 6.7L tpms VIN: 3D3KS29A98
he had the rf sensor replaced due to a leak at a different shop, tpms light was still on when he picked it up. A few days latter he came in to us and wanted a the bead clean on the left front, and since we would have the tire off he wanted a new sensor. we pro...
Fixes & Summaries for Chrysler
|2010 Chrysler PT Cruiser Classic 2.4L Misfire VIN: 3A4GY5F90A
Thanks to all that replied. We have a bad valve. Failed leak down test. Customer decided not to replace. Thanks again al Trouble codes: P0303.
|2008 Dodge Ram 5500 SLT 6.7L pressure control solenoid 3 VIN: 3D6WC76A58
ok im closing this one as not fixed but it will be this coming week. tranny shop has reverified bad solenoid. we are going to replace transmission with a reman dodge unit as every rebuild company we and the tranny shop have spoken too insist solenoids are not ...
|2005 Jeep Liberty Limited 2.8L fuel injector VIN: 1J8GL58525
Pulled injector and throughly cleaned hole and seat. Installed new washer and o ring. Ran till hot and retorqued injector, it took another 1/2 turn. Seems fixed.