Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 25, 2014
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
2007 Ford Explorer XLT 4.0L Transmission VIN: 1FMEU73E97
We put an engine in this and vehicle now has hard shift. It is getting a P0960 and P0748 as soon as it is started. I installed a Trans pressure guage and pressure goes up to 300psi instantly. I checked to see if both solenoids were functioning back at Computer...
View
2007 Ford Expedition XLT 5.4L Misfire VIN: 1FMFU16557
5.4 3v Triton. Vehicle misfires on number 6 cylinder only on a cold start up for about a minute or two and then will run like a top. Monitoring mode 6 data only shows counts and cylinder 6 and check engine light coming on for that cylinder and misfire with in ... Trouble codes: P0306, P0316
View
2009 Ford Escape XLT 3.0L Starting
Hope you ford guys can help
View
2011 Lincoln MKS EcoBoost 3.5L Hvac VIN: 1LNHL9FT8B
I will be looking at this again Friday as the customer says he smells coolant now. After checking for leaks, I am looking for some guidance as to any other things I should be looking for. Thanks in advance,
View

Fixes & Summaries for Ford
Fix/Summary Answers
1999 Ford F-250 Super Duty Lariat 7.3L MIL Lamp on VIN: 1FTNX21F6X
I wanted to give this one a little time before closing the post. I do beleive this one is fixed. After going through all the harness' and several test parts I had the problem narrowed to the injector coil was just bad enough to fail test criteria when the Idm ... Trouble codes: P1273 (3 cyl.high/low open idm), P1316 (Idm codes detected pcm).
7
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next