|Prev||Professional Automotive Repair Technical Discussions for November 10, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2011 Honda CR-V EX-L 2.4L Unknown VIN: 5J6RE3H72B
please help me ...I have a 2011 cr-v it has a vibration at 22 to 24 mph seems like you have to have a load ..like a uphill to get it to happen. I have replaced both axles. I did not get them from honda. I want my customer to be happy, but I am failing to see s...
|2004 Hyundai Sonata 2.4L Left front brake VIN: KMHWF25S24
Customer complained of brakes dragging, unable to accelerate above 40 mph. We examined the brake system and found everything working normally. Left front brake rotor was discolored from heat, so we installed new caliper and hose on left front and returned the ...
|2005 Kia Optima LX 2.4L Timing Cover area VIN: KNAGD12605
Has noise in timing cover area. Removed belts, noise still there. Replaced timing belt, pulleys, water pump, balance shaft & tensioners. Replaced hydraulic timing belt tensioner. NOISE IS STILL THERE. is there an issue with the belt? Do we need Dealer updated ...
|2007 Nissan Sentra SE-R 2.5L I/M Readiness VIN: 3N1BB61E27
Hi guys. Got a weird one here. This Sentra will not pass NJ Inspection because the MIL Command Status fails. I used the Autel DS708 to quickly check the readiness and MIL status. All monitors are complete and there are no pending or stored DTCs, it also displa...
Fixes & Summaries for Asian
|2004 Honda Accord LX 2.4L opds VIN: 1HGCM56434
after testing everything again installed a new seat and went through all calibration procedures light went off and car was fixed thanks for all the help
|2001 Toyota Tacoma DLX 3.4L Rumbling noise VIN: 5TEWN72N41
Thanks for all the help guys. We have finally gotten to the root of this issue. After changing both front wheel bearings and still hearing the noise. We had 1 guy ride on the bed while someone else drove. through that we could "feel" that it was coming from th...