 Prev |
Professional Automotive Repair Technical Discussions for October 30, 2014 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2006 Ford Taurus SE 3.0L heat VIN: 1FAFP53U56 the heat blows warm on vent but on defrost or a/c with the temp in the hot position blows cold you can turn off the heat and wait five minutes with vehicle running turn heat on blows extremely hot for about twenty seconds then back to warm on vent and cold on ... |
View | |
| 2007 Ford F-150 XLT 5.4L Spark Plug Broken VIN: 1FTPW14V07 I have only dealt with these triton 3 valve engines a couple times, I do have the lisle spark plug removal tool and it seems to work well, however in this instance the plug broke just the hex off, the threads still remain in the head. I am hoping I am not the ... |
View | |
| 2012 Lincoln MKZ Hybrid 2.5L Vibration VIN: 3LNDL2L36C This hybrid has a vibration through the body under heavy acceleration. When I drove it first I swore there was an engine mount gone and the engine was rubbing against the body. When you take off using just the electric motor there is no noise (but the electric... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2006 Ford E-450 Super Duty 6.8L Stall VIN: 1FDXE45S46 Good afternoon everyone this truck is FIXED!! We cleaned the throttle housing, both sides of the throttle blades, disconnected the battery for 1 hr to clear the adaptive memory. Started up, ran engine, road test - no stall! We kept it overnight and repeated to... Trouble codes: P0152, P0171, P0191, P0301, P0302, P0201. |
12 | |
| 1999 Mercury Grand Marquis LS 4.6L Charging VIN: 2MEFM75WXX Well the fix was the connector where it goes into the instrument cluster.Some one had worked on it before the way it looks and the terminals were loose so I reshaped the terminals so I got a snug fit and it fixed the problem. This was a digital dash so there w... |
11 |
