 Prev |
Professional Automotive Repair Technical Discussions for October 23, 2014 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1993 Ford F-350 XL 5.8L Brake Pedal VIN: 2FTJW36H7P There is no leaks, not getting any air while bleeding.bleed at every bleeder. Suspect the booster but never had one do this. And from all the research online people had replaced this stuff with no improvement. Just can't pull the trigger on the booster or the ... |
View | |
| 2002 Ford F-350 Super Duty XL 7.3L Surge VIN: 1FDWF37F42 Ugg I have a 7.3 here that is not making me happy.Low power issue.Started by finding lower control rod off the turbo not it.Removed valve covers check wiring and all connections.Found right cover slightly loose reconnect (Inside plug) retest no power,Scan no e... |
View | |
| 2004 Ford F-350 Super Duty Harley-Davidson Edition 6.0L No start VIN: 1FTSW31P14 Thank reading this. I got a Good one. Truck came in no start. Died driving down the Hwy. Had to change Batteries & cables to get it to turn over enough to test. only Glow plug codes returned. I checked CKP sensor w/ scope & I have Signal. No IPC pressure. So I... |
View | |
| 2011 Ford E-250 4.6L Charging VIN: 1FTNE2EW2B Alternator charge light comes on after 20 to 30 seconds of engine running. Code p0620. Have performed all testing relating to p0620 - testing shows to replace pcm - reinstalled the original alternator - same results - I have researched on iATN and other places... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2000 Ford Windstar SE 3.8L Unknown VIN: 2FMZA5243Y thank u guys the problem was the use cluster was wrong so i get next use cluster and program starts and run thank u guys again |
7 | |
| 2005 Ford Taurus SE 3.0L MIL Lamp on VIN: 1FAFP53235 Thx for all the replies,it was the high speed fan wire and fluid temp sensor wires grounding out on the a/c line at firewall. Trouble codes: P0712 (p0462-), P0462 (p0481-), P0481 (p0191-), P0191. |
16 |
