Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for September 6, 2014
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2000 Chrysler Sebring JX 2.5L instrument cluster VIN: 3C3EL45HXY
during road test on acceleration instrument guages drop out. let off accelerator and guages return to normal. have removed cluster found no probelems. customer states that problem started after installation of aftermarket radio. removed radio and problem still...
2001 Chrysler LHS 3.5L skim VIN: 2C3HC56G41
Hi Skim is locked not allowing me to start engine.By mistake I went over the 6 allowed start up and run for 5 seconds cycle until skim locked. Does any one knows a way to unlock it or if the only method is through dealer with a DRBIII? Thanks
2000 Dodge Ram 1500 Van 5.9L No Start, Cuts out VIN: 1B7HF13Z5Y
This truck was worked on by a previous shop who replaced the spark plugs and wires, coil, distributor rotor and cap. This has not solved the customers issue of the truck cutting out and not starting when hot. When it stops running the gauges all go dead and th...

Fixes & Summaries for Chrysler
Fix/Summary Answers
2005 Dodge Durango Limited 5.7L Hesitation, MIL Lamp on, no throttle responce VIN: 1D8HB58D55
thanks for the ideas. after replacing the crank sensor I was leaning to likely fault from the pcm. of 6 replies most were related to wiring circuit or component failure. we went back and recheck the harness. I found from the e.w.d that splice 102 would be a ve... Trouble codes: P0335, P2122, P0642, P1618.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next