|Prev||Professional Automotive Repair Technical Discussions for August 23, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Dodge Intrepid SE 2.7L Blend Door VIN: 2B3HD46R63
After replacing blend door motor, and doing calibration all worked fine. vehicle returned this week with a bad radiator. customer agreed to do radiator, hoses, t-stat, belts. when finished the blend door seems to sweep or recalibrate every time the engine is s...
|2010 Dodge Grand Caravan SXT 4.0L Misfire, MIL Lamp on VIN: 2D4RN6DX8A
We have a misfire in cylinder #5 at idle up to approximately 1100-1300 rpm and then it is totally gone. Cold startup I can see a random misfire in #6 cylinder but goes away after engine is hot. Only other symptom is at approximately 50 mph can feel a shudder/m... Trouble codes: P0305 (Cylinder 5 misfire), P0300
|2000 Jeep Grand Cherokee Limited 4.0L Drivers Door Lock Cyl. VIN: 1J4G258S1Y
This Jeep intermittently won't disable the security system with the drivers door lock/key. Everything I have read indicates the drivers door lock cylinder needs to be replaced. Also in the wiring diagrams there is a micro switch as part of the lock cylinder. B...
Fixes & Summaries for Chrysler
|2000 Jeep Grand Cherokee Laredo 4.0L Governor VIN: 1J4GW48S7Y
This brotherhood (& some sisters too) is the best. So as I figured from the responses and my own terminology mistake. The transducer was in fact the culprit. Dealer had it on the shelf, put it in and wahlah all good. Thanks again guys for the help. As a footn...