|Prev||Professional Automotive Repair Technical Discussions for August 12, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2007 Dodge Caliber SXT 2.0L Driveability VIN: 1B3HB48B17
Ok, this is my daughters car. Getting ready to head off to college. She has owned this car for about 4 months. In that time i have replaced ALL of the suspension components.When she first started driving the car all was well, then one day on take off she could...
|2000 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4G248S7Y
I've got a problem vehicle here. It's mostly a problem because I wasn't the one to originally work on it and I have no idea what happened to it before it got here. Customer said vehicle was sitting for 2 years, he tried to put a battery in it, hooked it up b...
|2006 Jeep Liberty Sport 3.7L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1J4GL48KX6
this car came in with a lack of power and and idle problem,we did a smoke test,a compression test,fuel pressure check,a crank and cam signal sync check,a coil switch cyl #1 and 2,found nothing conclusive,we then remove the fuel rail and drain and inspect the f... Trouble codes: P0300
Fixes & Summaries for Chrysler
|2007 Dodge Sprinter 2500 3.0L Excessive Emissions, Hesitation, Surge, MIL Lamp on, no power buck VIN: WD0PE845X7
thanks for the responses. i eneded up recalibrating the injector quantaty adjustment and that repaired it Trouble codes: 2359 (charge air pressure control too low).
|1993 Plymouth Grand Voyager SE 3.3L Poor Idle Quality, Hesitation, Stall, Screwy Shifting VIN: 1P4GH44R1P
This is truly fixed. I had found that the harness that went over wiper motor had rubbed through a B+ wire. A big grey one. Through heat and sparking, it had burned a small hole into the Orange/blue wire for the TPS feed to the EATX module. And I found that b... Trouble codes: 24 (TPS Voltage High).