|Prev||Professional Automotive Repair Technical Discussions for August 2, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2003 Mitsubishi Diamante LS 3.5L MIL Lamp on VIN: 6MMAP67P73
Vehicle arrived with P0401 code stored and active. checked egr for blockage- egr port clear and valve opens and closes. Next went and checked vacuum source at throttle body. It is supposed to have a ported vacuum source and I attached my gauge to the port on t... Trouble codes: P0401 (Egr low flow)
|2002 Nissan Maxima SE 3.5L fuel guage VIN: JN1DA31A22
Car comes in with a malfunctioning fuel gauge, reading full all the time. We change the sending unit with one from the dealer. Everything is fine when the car leaves the shop. A week later the car comes back and is having the same problem. So we tear apart the...
|2008 Subaru Tribeca Limited 3.6L Surge, Stall, MIL Lamp on VIN: 4S4WX93D28
Morning all, The Suburu came in with these codes stored, We looked over all the basics didn't really see anything, so we cleared codes let them drive it. The customer does keep up on the oil changes and recently had the oil changed to see if this would take ou... Trouble codes: P0016, P0017, P0018, P0019, P0021
Fixes & Summaries for Asian
|2005 Isuzu NPR 6.0L turn signals. VIN: 4KLB4B1V15
Sorry forgot about this one. Yes it was the switch on this one too. I really need to stop second gessing myself, thanks again.
|2003 Toyota Corolla CE 1.8L drums VIN: JTDBR32E23
I have to close it because it been more than a month and have not work on this corolla, I been working on his other car but we have planned to fix it next week. I will post the final off this case, Thank very much to all tech, I got really good info..
|2005 Toyota Camry 2.4L noise exhaust manifold VIN: 4T1BE32K45
Turns out that the Alternator is the culprit...unplugged the alternator and the noise went away. Thanks for all the help!