|Prev||Professional Automotive Repair Technical Discussions for July 31, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2006 Chrysler PT Cruiser Touring 2.4L wipers/headlamps VIN: 3A8FY58B56
car arrived no wipers and no headlamps check for codes none found removed battery cables from battery and jumped . reinstalled battery cables and all works normal .sent car out it returned in a couple of weeks with the same problem , have check for proper oper...
|1994 Dodge Ram 2500 5.9L a/c compressor VIN: 1B7JC26Z3R
Have by passed high and low pressure switches and fuses,the blower works in all position's so I'm thinking either the switch or powertrain control module,I also switched relays with no change.I'm wanting to varify my thinking before I go any farther. Thinks in...
|2004 Dodge Grand Caravan SE 3.3L MIL Lamp on VIN: 1D4GP24R54
Hello All, I have a Chrysler here I would like to get some opinions on. Fault P0138 (O2 sensor 1/2 high voltage). PID for sensor 1/2 is pegged at 4.8V and intermittently drops to 0V and right back up to 4.8V. Here are my test results: Signal wire, O2 1/2 disc... Trouble codes: P0138 (O2 Sensor 1/2 Voltage High)
|2006 Jeep Grand Cherokee Laredo 3.7L Wipers VIN: 1J4GR48K86
We have this jeep came in with wipers not working - needed ipm . Replaced ipm wipers work no problem but air bag light on with no communication to air bag module - would like to know if anyone knows if this needs to be configured i have wi tech - called dealer...
|2008 Jeep Patriot Sport 2.4L No Start, Stall, MIL Lamp on VIN: 1J8FT28W38
I used a scope to see if the sensors had any signal drop outs but none were present. The code only comes on during driving at slow speeds. I cant get it to act up in the bay. I also removed the valve cover because i found fine metal shavings when i replaced th... Trouble codes: P0017 (Crankshaft-camshaft timing misalignment-bank 1 sensor 2)
Fixes & Summaries for Chrysler
|1999 Chrysler LHS 3.5L No Start, MIL Lamp on VIN: 2C3HC56G2X
Hello, everyone. I wish to thank Jeff [...] Brewster for their replies to my help request on the 1999 Chrysler LHS. Unfortunately, the vehicle is not yet fixed, and because I have such a bac... Trouble codes: P1695 (No Body CCD Bus Messages), P1686 (No SKIM Bus Message), P1687 (No MIC Bus Message Cluster), P0300 (Multiple Cylinder Misfire), P1698 (No Trans CCD Message).
|2005 Chrysler Crossfire 3.2L Control head VIN: 1C3AN55L05
I have not been able to get the vehicle back. I will probably get it back before cooler weather. Thanks to all of those who helped.
|2006 Dodge Dakota SLT 4.7L missfire VIN: 1D7HE48N16
Guys thank you for all your help.I didn't know but my boss got the injector from a part store I don't like buying parts from it was a defect so I went to dealer got a good part and off it went every one happy thanks again god bless
|2008 Jeep Liberty Sport 3.7L wipers, instrument cluster VIN: 1J8GN28K78
Replacing the cluster and sending the vehicle to chrysler to be reprogrammed fixed this vehicle. After testing powers and grounds and scoping the communication lines at the cluster we knew the cluster was bad so we replaced it. Replacing the cluster restored...