Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 24, 2014
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1994 Ford E-150 Econoline 5.8L Poor Idle Quality, Misfire VIN: 1FDEE14H9R
this vehicle came in failing emissions. but the misfire under all circumstances needed attention. with the ignition missing, we replaced the ignition module, installed a test coil with no change, replaced the distributor with no change, looked at identifix and... Trouble codes: 332 (Egr performance), 123 (tps out of range)
View
1999 Ford Ranger XL 3.0L Excessive Emissions, No Start, Poor Idle Quality, Stall, Misfire, MIL Lamp on VIN: 1FTZR15V8X
we have a ford ranger with a new jasper motor done at another shop in a different town aprox 1500 miles ago it has very little vacume at idle 6 inchs we reset cam sensor it was off of tdc did not help ran compression test and they hit in at 105 to 115 a little... Trouble codes: P1761
View
2003 Ford Expedition Eddie Bauer 5.4L no crank VIN: 1FMFU18L33
Hi Guys, I have been working on this 2003 Expedition for a while now and donít know what to do next. It is a no-crank and no fuel pump situation. I know it sound like PATS but my Auto Enginuity Software, which can normally reprogram the keys says access is den...
View
2005 Ford Escape XLT 3.0L Air Bag VIN: 1FMYU93155
Hello Techs, Vehicle comes to us from a used car dealer. Issue is Air Bag light on. Codes stored are B2293 and B1869. Dealer replaced clock spring already. Using our Maxidas we recovered sub-codes B2293-16 , B2293-20, B2293-24 and B2293-28 . I'm leaning towar...
View
2006 Ford F-250 Super Duty XLT 5.4L MIL Lamp on, low power VIN: 1FTSW21596
Ok here we go. 5.4 3v. Customer brought truck in stating he just had spark plugs replaced(at a dif shop) and ever since then it sets p0171/174 and has low power. by low power i mean it will go hwy speeds ok but is just not the power it should be. like maybe 75... Trouble codes: P0171, P0174
View
2008 Ford Escape Hybrid 2.3L rock hard pedal VIN: 1FMCU59H08
New owner complained about funky brakes and warning lights. Car had codes C1472, U2023, B1213 along with U0418 and P1260. Was able to clear most codes then during test drive C1472, U2023, B1213 came back. Tried initialing brake system with IDS then had rock ...
View
2000 Mercury Mountaineer 5.0L Stall VIN: 4M2ZU86PXY
Vehicle came in originally as a stall while coming to a stop. I could never get it to stall while coming to a stop but I did get a start and stall after a hot soak. There are no codes in the system. I replaced the IAC and cleaned the throttle body. Now it does...
View
2006 Mercury Mountaineer Premier 4.6L Unknown VIN: 4M2EU48896
Looking for any information from people who have worked on these transmissions before. 6R60 also the same as ZFHP26. Very little information from ATSG or ATRA. No TSB's. When driving vehicle it will hunt for gears at highway speeds when hot. Also will hunt fo...
View

Fixes & Summaries for Ford
Fix/Summary Answers
1984 Ford Mustang GT 5.0L Surge, Cuts out VIN: 1FABP27M4E
Thanks for all replies tps was the problem and it looks like it was the third sensor. We replace the pickup in the distributor - no change also many wires were in need of repair Thanks to all who responded
11
2002 Ford Mustang GT 4.6L Cuts out VIN: 1FAFP42X12
Have not seen the vehicle back yet. Customer wanted to install his own programmer. I don't think this is the complete issue, but we have a saying that you fix what you know is broke and re evaluate. (If it could possibly be related to the problem. Will up d...
4
2004 Ford Explorer XLS 4.0L cylinder head gasket VIN: 1FMZU72K44
presented all the options to the customer and decided to go with a low mileage engine.
17
2006 Ford E-350 Super Duty 6.0L No Start VIN: 1FTSE34P46
Thanks guys, vehicle fixed. We had two issues. injection pump would not build enough psi, (we replaced it) and Stand pipe and dummy plug o-rings were allowing air leaks and not allowing enough pressure to build. I don't know of any way to diag both issues at o... Trouble codes: P2291.
11
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next