|Prev||Professional Automotive Repair Technical Discussions for June 20, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2004 Chrysler Pacifica 3.5L Misfire VIN: 2C8GF68404
Hi guys. I have a constant miss in cyl 4 which is not acessible due to the intake covering the coil and injector. I was able to acesss the wires for the coil that runs across the front valve cover. dk bl is the ground side switch from the pcm and i believe the...
|2011 Dodge Nitro Detonator 4.0L Misfire, MIL Lamp on VIN: 1D4PU6GX5B
Sorry for the lack of information above. In order to access the coils and injectors, the upper intake has to be removed. Once removed obviously it won't run. So we replaced the coil and injector on cylinder 4 and the rest of the spark plugs as maintenance. Whe... Trouble codes: P0304
|1996 Eagle Talon ESi 2.0L Spark VIN: 4E3AK44Y7T
Checked crank sensor, cam sensor, asd relay still have no start. Battery good, cranks fast. Power to relay, hot at coil, ckp signal at coil. No spark! tune resent, new coil 3 months ago,,, help!
Fixes & Summaries for Chrysler
|2005 Dodge Magnum SXT 3.5L head lights VIN: 2D4FV48V35
thanks for all the response,we hooked up scanner no codes,which was strange,could not activate and high beam or low beam with scan tool,also the low washer fluid light was on.full of fluid and sensor ok.cked all powers and grounds to f.c.m.decided to get a use...
|2008 Dodge Grand Caravan SE 3.3L clutch coil
Well, I wasn't able to fix this one the customer had a extended warranty from chrysler. so he went to dealer. It turned out that I had no power to compressor clutch wire, with it disconnected.I should have tested with a test light but didn't get car back to do...
|1997 Jeep Wrangler Sport 4.0L MIL Lamp on VIN: 1J4FY19S2V
Big thanks to all for the very helpful tips. Most everyone was on the right track ! The fix was a new distributor. As many speculated,we found the cam sensor not in sync. Moreover, it wasn't possible with the distributor the previous shop had installed.... Trouble codes: P1391 (Intermittent loss of CKP or CMP).