|Prev||Professional Automotive Repair Technical Discussions for June 13, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2005 Jaguar Vanden Plas 4.2L MIL Lamp on VIN: SAJWA82C95
I have a bad TPS and need to replace the throttle body. Is the Throttle body a plug and play or will we need to reprogram the ECU? Trouble codes: P2135
|2003 Mercedes-Benz E320 3.2L brake warning light VIN: WDBUF65J93
Thanks to everyone for your help in advanced. Car came in with brake ware light on. Pulled wheels and found front sensor worn and cut bringing on the light. We replaced the pads , rotors and sensors. Cleared code and road tested. We shut the car off,parked it....
|2005 Mercedes-Benz E320 4Matic 3.2L cv joint
this is a A200 w139 series[not listed in model list]just replaced inner front axle c/v boots,now have bad shudder on acceleration,straight foreward job, any idea what has gone wrong,have replaced many different makes over the years never had a problem,
|2005 Volvo V50 T5 2.5L No Start, Cuts out, Stall VIN: YV1MJ682X5
Thanks in advance for any help! Car drives fine then intermittently brake warning signal comes on in info screen, reduce power warning comes on and car runs poorly and usually stalls. Sometimes key will turn and no starter crank and some times key won't turn o... Trouble codes: ECM73, ECM74, C0EM, DF17, CEM71, CEME0
Fixes & Summaries for European
|2000 Porsche Boxster Roadster 2.7L Convertible Top VIN: WP0CA2980Y
Thanks for the replies. Guess I ll call this a fix. I replaced the micro switch in the windshield post and the switch on the park brake and the problem has not come back. Thanks for all the help.
|2002 Volvo S60 2.4L Valve Adjustment VIN: YV1RS61R52
Thanks to all that took the time to reply. What threw me off was one afternoon I had some time on my hands so I looked up on YouTube how to R&R this head. The guy put it all back together and it sounded like a thrashing machine. Then he said "I'll just wait t...