|Prev||Professional Automotive Repair Technical Discussions for June 7, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
Open Help Requests for Ford
|2001 Ford E-450 Econoline Super Duty Custom 7.3L driveabilty VIN: 1FDXE45F41
Having real difficulty with this one. It came in for hard start and then blue smoke complaint. The hard start was cured with a glow plug relay. Now the fun begins. It will start and idle fine, but raw fuel is evident at the tailpipe in the form of blue smoke. ...
|2006 Ford F-250 Super Duty Lariat 6.0L No Start VIN: 1FTWW23P76
Hi- I've got this 6.0l with a high pressure oil leak, air tested hpop thru ipr valve with special fitting, can hear air leaking in crankcase. removed valve covers- has updated standpipes and dummy plugs, nothing leaking in top end, can still hear air in crankc... Trouble codes: P2290, P2291
|2006 Ford Focus ZXW 2.0L Mechanical VIN: 1FAHP36N96
need help in determining what the problem could be ,I,m not a transmission guy
Fixes & Summaries for Ford
|2011 Ford Escape XLT 2.5L rear wheels VIN: 1FMCU0D7XB
Ok here it is. Theres no way to torque the rear wheel bearing (car sitting on the ground to hold the wheel) with the set up i have with out using an extension and by doing so as you may know the torque changes with extensions. This was the 2wd stub shaft from ...
|2003 Mercury Mountaineer 4.6L engine VIN: 4M2DU86W83
The engine rebuilders found the leak. It was coming from the engine block in the middle of the valley. They cut a hole into the valley and filled the cooling system and applied 20 psi they were then able to see the hole in the block. They said it may have been...