|Prev||Professional Automotive Repair Technical Discussions for June 6, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2005 Dodge Dakota Laramie 4.7L Transmission VIN: 1D7HW58NX5
Hi Everyone. I have a 2005 Dakota that we just sold, it came back with a check engine light for a p0700 and a p2706. The p0700 just says that its a code to tell me there's a code and the p2706 says ms shift solenoid which I've gathered is the multi select shif...
|2008 Dodge Grand Caravan SE 3.3L clutch coil
Having a hard time believing that the power circuit to the compressor clutch is not protected with a fuse. The wiring dia. shows clutch relay out, going to the clutch. Terminal 50 on connector c3 of the tipm, The clutch coil is shorted has .2 ohms instead of t...
Fixes & Summaries for Chrysler
|2001 Chrysler 300M 3.5L Cooling System VIN: 2C3AE66G41
It Was Indeed The Engine Oil Cooler In The Radiator. Replace The Radiator, Flushed The System The Best I Could And Then Rechecked For Head Gasket Issues But Found Nothing. So, It's Out The Door. Thanks For The Help.
|2001 Dodge Ram 3500 5.9L Surge VIN: 1B7MF33651
I found truck to be running rch at high load low rpm boost was too low at the problem rpm made adjustable waste valve to control waste gate reaction speed held boost longer and surge is gone .this repair did not change maximum boost just how fast it opened was...