
![]() |
Professional Automotive Repair Technical Discussions for May 19, 2014 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Ford
Help Request | Answers | |
1991 Ford F-150 Custom 4.9L No Start VIN: 1FTDF15Y3M Hey guys, I got this one in ona a hook. It will turn over but it will not run. With the key on the fuel pump relay, thermactor air diverter solenoid, and thermactor air bypass solenoid will buzz until you turn the key off. It does have injector pulse. I have c... |
View | |
2006 Ford F-350 Super Duty XLT 6.0L No Start VIN: 1FTWX31P26 The engine will not start. It runs Injector Buzz test and passes BUT you don't hear the injectors. Also no key up clatter. Run KOEO, Buzz and continuous, have no codes. All Sync, ICP, IPR FICM M power, Bat voltage and RPM are within acceptable levels. ICP KOEO... |
View | |
2008 Ford Expedition EL Limited 5.4L Timing Chain VIN: 1FMFK20568 Hi everyone got one here that i am not that familiar with. I fixed this truck last year and an exlorer a few months ago for the same problem(broken right guide). The truck was fine for a year and about 12k miles after the repair. When we torn it dowm we found ... |
View |
Fixes & Summaries for Ford
Fix/Summary | Answers | |
2006 Ford F-250 Super Duty XLT 6.0L No Start VIN: 1FTSW21P46 The tech originally was using a small hand held to view the pids. I believe he was viewing the wrong pid for the icp pressure reading. I believe he was viewing desired. Once I got involved and hooked the verus up and viewed the icp pressure during cranking. It... |
12 |