|Prev||Professional Automotive Repair Technical Discussions for May 16, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1988 Ford F-150 Custom 5.0L Engine VIN: 1FTDF15N6J
I was given this truck by another shop. The customer threw in the towel and got frustrated and didn't want to spend any more on repairs. It will not start after it reaches operating temp hot soak. I put a box fan blowing down on the engine to cool it down for ...
|1999 Ford F-450 Super Duty XL 6.8L Poor Idle Quality, Misfire
Vehicle came to the shop with an overheating cond. After technician finished the head job engine starts but misses during idle, after basic checks i got a waveform for cam/ crank sinc. The cam triggers after 5 times of the crank trigger. I have in my files a g...
|2011 Ford F-150 Lariat Limited 6.2L crank no start VIN: 1FTFW1E68B
Hello FORD guys this truck would crank strong & not start I found out I had no power to fuel injectors trace it back to battery junction box (smart junction box) found out that several fuses had no power but the box had good power to it. bang on the box with m...
Fixes & Summaries for Ford
|2003 Ford Windstar SEL 3.8L L/side sliding door VIN: 2FMDA53413
Every body that helped thank you .car went back to customer cost of the motor was not in his budget I put a current clamp around the wiring on the motor and yes the amperage was out of range so I gave the customer the option and he declined thanks again for...
|2005 Ford Freestar S 3.9L p1336 VIN: 2FMZA50675
Replacing plugs and wires( while needed) did not affect the code setting. The code would set the same as before the parts were replaced, not return once cleared during engine running, return after key cycle withing 30 - 40 seconds in pending after restarting....