|Prev||Professional Automotive Repair Technical Discussions for March 25, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2005 Audi S4 4.2L Poor Idle Quality, Misfire, MIL Lamp on VIN: WAUPL68E35
HI, I have this S4 in the shop that is running very rough. Check engine is on and it is throwing misfire codes on cylinders 1234. ( right bank ). I verified that there is spark and fuel, and there is compression at about 130psi on all right cylinders. I read a...
|1996 BMW 328i 2.8L Poor Idle Quality, Surge VIN: WBACD4328T
Car came in with surging and very high idle. Trans was in limp mode. CEL and trans light were on. Customer replaced idle control motor to try and fix this problem, then brought it here when it didn't work. After clearing codes and all adaptations, the car will... Trouble codes: P1188 (227 - Mixture deviation cyl 1-3), P1189 (228 - Mixture deviation cyl 4-6), P0121 (012 - Throttle valve potentiometer), P1765 (154 - CAN gas pedal position EGS)
|2009 Land Rover LR2 HSE 3.2L Charging VIN: SALFT24N49
vehicle was towed in for no start! battery was dead, recharged and cleared out code. It started right up! after running for awhile battery light came on! checked alt. and there was on voltage, just battery and droping! replaced alternator, restarted vehicle an...
Fixes & Summaries for European
|2006 Land Rover LR3 4.0L hard start slow cran VIN: SALAE24406
After doing some testing I found the starter motor was bad. The draw was 290 amps and the spec I got in aldata was 1.8 kw witch is 180 amps at 10 volts cranking voltage. Didnt get to finish this car as the customer declined starter motor but was the only that ... Trouble codes: P0335.