 Prev |
Professional Automotive Repair Technical Discussions for January 23, 2014 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1999 Ford F-350 Super Duty XL 7.3L Front seal VIN: 1FDWX37F3X We replaced the seal and it started leaking in about 1000 miles. |
View | |
| 2000 Ford Ranger XL 3.0L pats VIN: 1FTYR14VXY I am having a problem with my j2534 pass thru device.We are trying to reflash a key [which we have done before] we keep getting this message FMP FAILED TO [...] A CONNECTION WITH THE J2534.I have checked the connections 100 times I am able to read all oth... |
View | |
| 2000 Ford F-250 Super Duty Lariat 7.3L MIL Lamp on VIN: 1FTNX21F5Y Came in with crank no start. Tests concluded inj driver so replaced and it started. Cam sensor replaced due to fault stored. Ebp sensor replaced due to near total restriction, tube replaced due to 1/2 restriction. Now giving left bank high/low open faults. So... Trouble codes: 1293 (open b1), 1294 (open b2), 1272 (open inj2), P0340, 470 (ebp) |
View | |
| 2007 Ford Fusion SE 3.0L frame VIN: 3FAHP07157 Hi all, I have this wonderful 07 Fusion with a rusted broken off subframe/engine cradle bolt. It is one of the rear ones, they are studs (I doubt they are threaded) that I assume are welded within a closed channel in the body. Has anybody ever had to repair on... |
View | |
| 2008 Ford F-250 Super Duty XLT 5.4L Rear Wheel Speed Sensor VIN: 1FTSW21518 Code c1175 will not clear. I have replaced rear wheel speed sensor and pigtail for being broken. Have ohmed out each wire to rear sensor and have less than .2 ohms on each. Have ohmed for short to ground and power and together and found no problem. Have ohmed ... |
View | |
| 2011 Ford E-350 Super Duty 5.4L Tpms VIN: LFTBF3A68B Ford Techs!I replaced the BCM which fixed the turn signal problem but I had a lot of problems with the PMI programming. I kept getting an error message "communication error, do you want to try again". After three or four tries it went through. It gave me the c... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2007 Ford F-150 XLT 4.6L engine vibration VIN: 1FTRX12W57 Thanks for all the replies , they were all very useful and informative , i did try some of them and prior to the original post i did some of the suggested repairs , but unfortunately could not fix it , but the customer said he will be back so we can further di... |
16 | |
| 2007 Ford Edge SE 3.5L waterpump VIN: 2FMDK36C17 Waterpump and COOLANT pipe. VALLEY HAS HOLE TO LEAK WATER THROUGH TRANNY JUST LIKE THE 4.6 and 5.4 engines. Not to bad big job pack your lunches. |
7 |
