Prev | Professional Automotive Repair Technical Discussions for January 12, 2014 International Automotive Technicians' Network (iATN) - Members Only |
Next |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for European
Help Request | Answers | |
2002 Land Rover Discovery Series II SD 4.0L Excessive Emissions, Misfire, MIL Lamp on I started working after my coworker change spark plugs and spark plug wires, I checked and showed two wires for each coil, but noticed that the injector pulse at 7.0 ms. and I wonder if computer can be at fault, do not have much information on land rovers and ... Trouble codes: P1591, P1000, P1000, P1000, P1000, P1000 |
View | |
2002 Mercedes-Benz S500 5.0L trunk light VIN: WDBNG75J42 Car came in with a dead battery after it sat for 3 days. Charged battery and left overnight; battery self discharged to 11.6V. Replaced battery with AGM Interstate battery and checked charging system. Alternator output good no issues with charging system. Cond... |
View | |
2002 Volkswagen Passat GLX 2.8L heat VIN: WVWRH63B52 Hi Everyone, If I had any hair left I would pull it. This thing is driving me nuts.It came inn with no heat at idle.After reading articles on IATN I sold a water/thermostat and tbelt joib cause of the many issues. After using an airlift to fill cooling system... |
View | |
2003 Volvo XC70 X/C 2.5L Steering VIN: YV1SZ59H03 Hi fellow tech’s, I really need some help on this one. I have a 2003 Volvo XC 70 that came in for Hard Steering, turning right or left at slow speeds is like the power steering does not work. Five months ago we replaced the lower A arms and ball joints, inner ... |
View |
Fixes & Summaries for European
Fix/Summary | Answers | |
2000 Volkswagen Passat GLS 2.8L Central Convenience Module VIN: WVWND23B1Y I am going to have to close this request without a fix. On the advice of those who replied I disconnected every circuit to the Convenience Module one at a time until only module power and ground were left. I still had the same current draw. When I removed powe... |
13 |