Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for January 9, 2014
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for GM
Help Request Answers
2008 Buick Lucerne CXL 3.8L Ignition VIN: 1G4HD572X8
08 buick came in yesterday not starting and the key stuck in the ignition. we have not been able to remove the key or get it started. we have no power to anything. door locks inop all lights inop. turn the key and nothing happens. no power to the dlc so we can...
2005 Chevrolet Colorado Z85 3.5L MIL Lamp on VIN: 1GCCS19685
Have a p0315 code that I can't get rid of.Using a Genisys otc scanner, code will not clear,scanner says it cleared but still there and light stays on.Tried to do crank relearn numerous times will not complete,shows waiting for crank enable and checking status ... Trouble codes: P0315
1994 Pontiac Grand Am SE 2.3L oil pressure VIN: VFHGE25786
OK guys I need some help here. I did a routine head gasket job on this car was a little nervous about it see has how I never done any thing on one of these before however it was really smooth sailing apart and together. The original problem was the gasket blew...

Fixes & Summaries for GM
Fix/Summary Answers
2005 Chevrolet Equinox LT 3.4L No Start, Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 2CNDL73F65
Sorry to inform that the customer took the vehicle to the dealership and informed me today that they replaced the ECM Thanks to every one who offered me help. Trouble codes: P0067 (p0101-), P0101.
2004 GMC Yukon XL 1500 SLT 5.3L drivers seat heater VIN: 3GKEC16Z24
drivers door module fixed this issue. sorry to all for taking so long to close this request. thanks to all for your input. best wishes for the new year/
2008 GMC Sierra 1500 WT 5.3L hydraulic brakes VIN: 2GTEC13J78
After another attempt at pedal pressure bleeding, with no improvement in pedal quality at all, we replaced the brake master cylinder and all is good and well now. We use the vacuum/ evacuators on our Hondas and Acuras weekly and have never encountered a proble...
2002 Pontiac Grand Prix SE 3.1L Passkey III VIN: 1G2WK52JX2
Turns out it was the VTD module. It was going to take a couple of days to get the module from the dealer and the customer was pushing for the car so I grabbed a used one, performed the relearn and it's all good now. I got the most useful info from Robert from ...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next