Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 6, 2013
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2001 Chrysler Town & Country Limited 3.8L skim/keys VIN: 2C8GP64L31
This all started back in july,when this van was towed in after an attempted theft and a damaged steering column. I replaced the ignition lock cylinder housing (lock cylinder was saved) and skim module, programmed the skim with a drb 111 and all was good. A cou...
2007 Chrysler 300 Limited 3.5L engine VIN: 1C3H9E3D07
need wiring diagram for complete immobilizer system,layout of all relays an fuses to check an c y no communication to engine module
1992 Dodge Dakota 5.2L No Start VIN: 1B7GL23Y4N
Have a no start condition, bad PCM - only 4 volts to the crank and cam sensors instead of 8. Good power and grounds. Question I have is does this older PCM need to be reprogrammed or will it run without it?

Fixes & Summaries for Chrysler
Fix/Summary Answers
2001 Chrysler Town & Country EX 3.8L pci bus VIN: 2C8GP74L51
thanks to everyone but the custome dont want expensive more and took his truck I thank all those who helped me, thank you very much
2002 Chrysler PT Cruiser Touring 2.4L No Start, MIL Lamp on VIN: 3C4FY58B92
Special Thanks to everyone that responded every one sounded very informed and professional with your comment First off yes this is a fix with a new computer.. Larry, Peter, Robert [...] and Steven: Its good to know we all plug in the cam/coil plug , I on... Trouble codes: P0340.
2000 Dodge Durango R/T 5.9L Governor VIN: 1B4HS28Z3Y
Thank You for the replies. The governor pressure solenoid did indeed fix the problem as the replies said it would. For those of you trying to diagnose this problem, a 100 psi gauge (your oil pressure gauge will work fine) with a hose extension, hooked...
2006 Jeep Liberty Sport 3.7L chassis? VIN: 1J4GL48K96
removed front drive shaft vibration was still present removed the rear shaft found binding ujoint in rear drive shaft
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next