|Prev||Professional Automotive Repair Technical Discussions for October 15, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2001 Chrysler Town & Country (Van) Limited 3.8L Liftgate VIN: 2C8GP64L71
Chrysler Guru's please help. When parked, this Town & Country's Lift gate with no warning, will open randomly at any unexpected time, sometimes it will close, sometimes remain open. I could watch it for 5 or 6 hours and it will never open and look at it 5 minu...
|2003 Chrysler PT Cruiser GT 2.4L Noise turbo VIN: 3C8FY78G23
On accel get loud noise coming from turbo,
|2009 Dodge Journey SXT 3.5L Stall VIN: 3D4GG57V79
Vehicle came to us after a dealer replacing the cam sensor (appears old sensor reinstalled) and now telling the customer they need a (I'm guessing cam) sprocket. Vehicle is towed in, customer states it stalls when driving. It stalls once for the tow truck dri... Trouble codes: P0344 (Cam position sensor intermittent B1S1)
Fixes & Summaries for Chrysler
|2008 Chrysler 300 (Car) LX 2.7L MIL Lamp on VIN: 2C3KA43R28
Replacing the knock sensor seemed to do the trick. Remember this sensor had got very hot when the engine overheated and was flooded with coolant. While the broken crankshaft bolt is still a concern, apparently this condition has no effect on the "noise" the or... Trouble codes: P0325 (Knock/Combustion vibration sensor).
|1999 Dodge Grand Caravan ES 3.3L Steering VIN: 1B4GP44G5X
21 Replies... I am obviously not the only one who has had this happen. Quite a few of you said to check the steering linkage, ball joints, u-joints ect. I assure you this was checked and triple checked. The cure as many of you suggested was a new pump from Chr...
|2005 Dodge Sprinter 2500 2.7L Altenator VIN: WD2PD74405
Much thanks to everyone. You guys are the best! Needed new Altenator, and Instrument Panel. Thanks to Louis we were able to Excite the field of the new Altenator with his 500 Ohm resistor method. Then realized the IP was defective. Ip needed to be programed ...